Giant Bubble Wand Big Bubbles Maker Toy for Kids and Adults Bubbles Hoop with Inflatable Dipping Pool Tray Fun Outdoor Toys

Product Details

Product Details

Product name: Giant Bubble Wand Big Bubbles Maker Toy for Kids and Adults Bubbles Hoop with Inflatable Dipping Pool Tray Fun Outdoor Toys 

Operation instruction

Must make the bubble liquid to filled with the ring!!! Too little bubble liquid can't succeed!!

*62cm per use (half bottle) is 500ml of concentrated bubble liquid, enough for about 50 people to play.

*70-80cm each use (bottle) is 1000ml concentrated bubble liquid, about enough for 100 people to play.

*Concentrated bubble liquid is 1 to 8 with water, do not use hot water with tap water, water is less rather than more.

*Mix well for at least 2 hours, mix well one night in advance for the best results the next day.

*The wind is not suitable for the condom. You can use other tools.

*The temperature is too low below 10 degrees need to be heated after use!

Friend, there need some skills when play, you need to follow the following operations, such as doing activities, please practice in advance before holding activities. So as not to be embarrassed at the event.

1. Firstly, install the tools, we can share video for reference;

2. The PVC inflatable pool is full of gas; If there is debris on the ground, it is necessary to sweep it clean or use a large paper pad under it to prevent the pool from breaking.3. Mix 1000ML of bubble liquid 1:8 with water, use a bucket, go to a bottle of liquid, pour 8 bottles of water down, so it is clear, mix water lightly and put it for 1-2 hours; Cash it one night in advance!

4. The bubble tool ring placed in the pool needs to be manually adjusted to fit the bubble pool, and adjusted until the bubble ring does not touch the pool when pulling the bubble. You can contact us to find out how to adjust eye level, and the bubble rings need to be out of the bubble water. The bubble pool needs to be filled.

5. Wet the side of the pool with bubble water, or spray some water mist in the air with a watering can to pull out more colorful bubbles.

6. If there are still not clear to take pictures or videos flat we see pro play teaching. After playing tools need to be washed with water, air dry, easy to play next time.

Tips: The color of the bubble tool is diverse, we will randomly match, have special requirements, please contact customer service remarks Oh! After playing with the bubble tool, please wash it with clean water, and put it away next time to play as new!

Before adding water, shake the bubble liquid evenly, the ratio of bubble liquid and water is about 1:8, as long as we add water according to the proportion range of our regulations, gently stir and place for a few hours or a while can be used, and the effect will be better if it is placed for a day in advance.

Normal about 20 degrees with ordinary tap water can be, if conditions, distilled water is the best quality. Next is pure water, and then cold or warm water. 

Method: Find a clean bucket, first pour this bottle of bubble liquid into it, then use this bottle to fill about 9 bottles of water into it, and gently stir it. Then there are a few caveats to keep in mind. 

Note:

1. Be sure to mix water according to the proportion we require, pure water is the best, tap water can also be prepared in advance of the day effect will be much better；

2. When pulling bubbles, the action should be steady, not to pause, not too slow, and not too fierce. Make a big bend;

3. The foam in the bubble water will affect the effect, timely fishing;

4. The bubble water must be submerged in the bubble circle, that is, the bubble circle must be completely wet to the water to form a bubble film;

5. All parts of the bubble pool should be wet to avoid bubbles touching dry places where the bubble film will be easy to break;

6. The set of people set the circle to pull straight up first, pull over the head and then turn, pull careful not to touch the people's clothing corners, hair, etc;

7. The success rate of outdoor performance will be reduced in the case of wind, and the weather with high air humidity is super good to make bubbles. 

Bubble show performance requirements are very strict, environmental factors have a great impact on the bubble effect. In winter, the temperature is low, the active molecules run slowly, the film of the bubble is thick, the bubble will sink quickly, coupled with the dry air in winter, it will break quickly.

Therefore, it is recommended that the temperature is below 10 degrees, everyone uses a small electric blanket to surround the bucket of bubble water to heat or use "hot fast" heating before the performance. The temperature should be around 30°. Can guarantee the performance greatly improved.

Disadvantages of outdoor operation set bubble:

The outdoor set of big bubbles will be affected by the environment, in the case of a breeze, the bubble is easy to tilt to the side, when it touches the edge of the pool or people's clothes or any object next to it will soon break the wind, the bubble can not withstand the strength of the wind, it is easy to be blown, blown. So the success rate in this case is not very high.

This needs more attention!